Slider controls - Indicator

This is where you can find the controls.

If your slider has autoplay on it, you can show how much time has passed, and how much ha left, until your next slide comes. (This control will only appear, if the Autoplay is enabled.)

Pie

Display Expert

You can make your indicator invisible on Desktop, Tablet or Mobile view. Also you can hide them on specific slides separated by commas. Where those device display modes will be happening are based on the Global setting's Responsive mode option.

At the Hide on slides use the slide index (1 = first slide) instead of the slide ID.
Shows on

This option will make your indicator only appear on desktop screen, when you hover your cursor over the slider. On tablet and mobile screen they will always be seen.

Position

Pick a position, where you would like to have your indicator in your slider.

  • Stack Expert - The order of the controls, which you put into the same position.
  • Offset - This is how far your indicator will be from the selected position. If you change to Advanced mode, you can specify the position, and here you will be able to use our control variables too.
Size

This is how big your indicator and how thick its line is going to be.

Color

The color of the whole indicator, and the color of the line, which is indicating the time.

Skin

Two kinds of displays what you can choose.

Stripe

Display Expert

You can make your indicator invisible on Desktop, Tablet or Mobile view. Also you can hide them on specific slides separated by commas. Where those device display modes will be happening are based on the Global setting's Responsive mode option.

At the Hide on slides use the slide index (1 = first slide) instead of the slide ID.
Shows on

This option will make your indicator only appear on desktop screen, when you hover your cursor over the slider. On tablet and mobile screen they will always be seen.

Position

Pick a position, where you would like to have your indicator in your slider.

  • Stack Expert - The order of the controls, which you put into the same position.
  • Offset - This is how far your indicator will be from the selected position. If you change to Advanced mode, you can specify the position, and here you will be able to use our control variables too.
Size
  • Width Expert - The length of your indicator.
  • Height - The thickness of your indicator.
  • Overlay - If you put the indicator outside your slider, and you don't want it to be included in your slider's size, you just want it to float over the content, then turn this option on. (Simple visualization: change the Height of the indicator to 100px, and position it in top of the slider, then check the Preview with and without this option turned on.)
Color

The color of the whole indicator, and the color of the line, which is indicating the time.

Related Articles